Search results

  1. LOH CHO

    Flagship One 0411 PCM

    I'm going to be doing an 0411 PCM swap. I already got the pinout sheet from Lextech. I just need a pcm. Since I'm in the rust belt I'd like to find a clean ecm that's not corroded or anything. I came across Flagship One has anyone ordered a PCM from them? I thought it would be easy to just...
  2. LOH CHO

    6" Lift Bilstein 5100 rear shocks? 24-067379 2-4inch?

    So I bought a set of the 5100s I just ordered the part numbers listed in other threads and such. Front shock are not my concern stating they're meant for a 4-6inch lift. Rear shocks 24-067379 state they are meant for a 2-4inch lift.....Am I missing something? This is what everyone uses on...
  3. LOH CHO

    Pro Comp 4inch vs 6inch?

    Anyone know if Pro Comp lifts are a true 4inch and 6inch drop in the front? I can see that the 6inch comes with an AAL for the rear. But I'm wondering if they are similar to rough country as far as just a key crank to gain the extra lift in the front? Thanks!
  4. LOH CHO

    Door speaker depth component set

    My truck is in storage and not accessible at this time. Otherwise I would not be creating this thread. Anyone know what the maximum depth for a 6.5 door speaker is before hitting the glass? Getting mixed answers from crutchfield. My issue: (I am able to get JL at cost thus why I'm not just...
  5. LOH CHO

    Dynomax 54020 intermediate pipe SPEC HELP

    Hey all does anyone have this intermediate pipe on their truck? It's meant for a 96-99 5.7L I know it's 2.5inch pipe but I'm looking for the spec at the end of the pipe what the center to center distance is. Dynomax 54020
  6. LOH CHO

    Southern 98 k1500 brought back to Canada (BUILD THREAD,PIC HEAVY)

    I finally did it, I finally got a totally rust free totally clean 98 obs from Arizona. This has been a long time dream for me to do. Being in Canada and southern Ontario (north of the gta for any other Ontarians) the salt is horrible here and getting worse with the liquid deicer they are laying...
  7. LOH CHO

    17 year old Vortec 350 (no miles) bad choice?

    So my nieghbour has a Vortec 350 out of a 98 4x4. It was pulled from the truck when it was new so it has probably less then 1000miles on it, its been in storage since then. Its a complete engine top to bottom with a waterpump and power steering pump on it. Im worried that seals, gaskets,(coolant...
  8. LOH CHO

    97 vortec with an LT4?

    So my truck needs head gaskets. I always said I would build something when the time came to pull the motor. The original has 300,000km on it and I have a line on a fresh crate 350 that's had some work done already for $1500. Ill be getting some details in a few days such as cam specs (I think...
  9. LOH CHO

    Summit racing 3"BL vs. PA 3"BL any difference?

    Ive tried searching for this but cant find anything. Is there any difference in the two kits? This is kinda like a torsion key question lol.
  10. LOH CHO

    3 inch body lift and the 99 Escalade hitch

    So I've read from numerous sources that when you do a 3 inch body lift, if you get the 99 Escalade hitch that it will tuck under your bumper very nicely. I've seen it and it looks awesome. I'm wondering though will or why won't a hitch off a suburban, yukon, or Tahoe work? They should be the...
  11. LOH CHO

    Noise in 4 high!

    So I just noticed it this year after our first dumping of snow, it had probably been a few months since I last used the 4x4. When I have the truck in 4 high im getting a driveline noise at almost any speed above 20kph(10mph), more noticeable on decel. Its not a whining noise but more of a growl...
  12. LOH CHO

    Westin STEP BAR HELP

    Hey does anyone have Westin step bars on their ECSB's? Could someone post some photos on the mounting brackets please! Cheers
  13. LOH CHO

    Cam and Lifter kits

    So Ive been toying around with the idea that when the time comes to replace my intake gaskets I might as well do a cam a lifter kit, along with other things like timing chain, new push rods maybe even springs and rockers. Cause you know the saying "while im in there". Ive been looking around and...
  14. LOH CHO

    Stock door speakers louder then New

    Got a bit of an issue here. I went out and bought a set of JL 650-cxi coaxial speakers for my doors. I did this cause I figured they would sound better then the 16 year old stock speakers. The JL's are noticeably less quiet and pump out less. I know they are wired in correctly but I'm stumped as...
  15. LOH CHO

    My 97 life

    So its been just over a year owning my truck and I almost have it they way I want. Of course a lift would be nice but im not committed enough for one, nor in the situation with school coming up again. Since I got it the thing was bone stock. I first got a new deck put in it, then came the duals...
  16. LOH CHO

    will 15inch aluminum rims fit?

    Hey guys so i know 15 steel rims will fit on our trucks but what about 15inch aluminums? Ive found some really nice aluminum rims but i dont want to order them unless i know they will work. They are a 15x8 with -13 offset/backspacing what ever that is. Any help is great! Cheers
  17. LOH CHO

    Whos running a 15x8 rim? Whats your backspacing? How much do they stick out?

    Hey guys still stuck in a jam Id like to hear what you guys have for backspacing on a 15x8 rim. I have factory fender flares on it the truck. Id like them to come out almost flush to them. Is 3.75 too much? These will also be going on a 33x12.50 tire cheers
  18. LOH CHO

    Wheel Backspacing

    Okay so I'm looking at getting some procomp steel wheels for my 97 4x4, I have some factory fender flares on it so I would like to have some offset but I don't know how to find out how much the rim has. On the wheel description it says its backspacing. Would that be my offset? Cheers
  19. LOH CHO

    RCX 2-3inch lift kit, worth it?

    Just checking out the RCX site and saw the 2-3inch kit with new upper control arms and shocks and keys etc. Does anyone have this kit in their own trucks? How it rides etc. I have 33s so I thought this could be a good route. I have been through the whole just get the 6inch and decrank to 4 but...
  20. LOH CHO

    CB Radios and no idea what im looking for

    Hey guys im looking for a little advice, I want to get a cb radio but since there are tons of them out there I have no idea whats decent. It will be mainly used for convoying trucks so nothing crazy distance really thats about it. I would also like it to fit in that slot under my stereo. Just...
  21. LOH CHO

    tire rotation order

    Hey guys so I got a set of 33x12.5015 hercules trail digger tires. I got these used, 3 of them have about 17 32s left and one has about 15(it was on the peelwheel) so to start I was going to put the two rears on the front and cross the fronts to the rear. If I rotated my tires like this over...
  22. LOH CHO

    The Finished Product demoulded/ color matched flares/ black STOCK rims

    So I had this finished in November but could never get a decent photo with the weather and all. I had it done from a guy not too far from me and what he ended up doing was, repaint the silver color match my flares and he also put new metal in the bottom of my doors. There were no holes anywhere...
  23. LOH CHO

    6inch rcx on 98 1500 6.5 turbo diesel BIG ISSUE...

    So over the weekend we installed a 6inch rcx into my buddies 98 half ton diesel 6.5. We ran into a big problem when we put the front diff back in. The yoke for the front drive shaft is DIRECTLY in line with the cross over pipe. Other then that there were no more problems. So now he has to take...
  24. LOH CHO

    HIDs interfering with radio

    Im having radio issues with my HIDs. When the lights are on and I have the radio playing it can get develop a lot of static, turn them off and radio is fine. I thought at first it was cause they were mounted to the inner fender and interfering with the antenna. So I zip tied them up and I still...
  25. LOH CHO

    demolded before and after on two tone

    So I demolded my truck simple as that. Why?: Getting the silver down redone with rocker guard underneath and color matching factory fender flares. Im going to leave the moldings off the truck cause I love the look. I think it looks super clean, and maybe get some updated silverado badges :)...

Latest posts

Members online

... and 15 more.
Total: 1,544 (members: 65, guests: 1,479)

Forum statistics

Threads
64,355
Messages
1,392,012
Members
51,477
Latest member
Ryvax

Share this page

Top