c notch installation price

[sewlow]

DJM C-notch on my '98, 4/6 drop. I had to notch the cross member on the box above the pumpkin. Actually bent the floor up, from the rear end hitting it. (Maybe, could be, caused by the way the way that I occasionally drive it? Hmmm.) Soon as it was cut, though, it went 'boing' & back to it's original shape. The pumpkin probably won't come close, now that I've relocated the upper shock mounts.

 

[1996*GMC*SHORTBED]

The Super-C Notch is the only way to fly. I put mine in years ago, and I only run a 6" rear drop. I could not stand hearing/feeling the rear-end hitting the frame, while going over small bumps, with even a tiny bit of weight in the bed. The half-tons really have soft springs & a wimpy frame, but they ride nice, lol. Forget the brand, but the Super-C section I bought was just like the one in the link above, but all the pieces were welded together when they came in the box. I also trimmed the little bed support rail just over the rear-end pig, so it wouldn't hit either. I bought & installed red Energy Suspension brand urethane frame stops, which are a bit shorter than the factory ones too. Then I installed Air-Ride rear air bags, with the air lines exiting right behind my flip-up license plate, which hides the hidden Class 2 reciever hitch.

 

[ricerocket1135]

It is already in my posession or I would have. I may end up ordering one anyway and going that route. Anyone have a pic of the installed notch he has proposed here?

Intact Bed + Bigger Notch = BADASS!

 

[1low95GMC]

you dont have to removed the bed to do that notch but it would make it much easier. You would be better off getting a beltech or DJM notch for that price. That is just some knock off brand

thanks

 

[1low95GMC]

I don't much care for any of the small notch's, I like this one and you still don't have to cut the floor, it gives you the most room you will get without cutting the floor. http://www.avsontheweb.com/product.php?productid=149&cat=37&bestseller

i dont need a large notch. i just want to keep the axle from hitting the frame

 

[DRAGGIN95]

I have ran those other notch's like Belltech, DJM, etc. and you will still bottom out all the time with those they just aren't big enough.

 

[MOBS]

draggin may get a visit here soon

 

[1low95GMC]

I have ran those other notch's like Belltech, DJM, etc. and you will still bottom out all the time with those they just aren't big enough.

it couldn't be any worse than it is now i guess

 

[shortchevy]

I charge my friends pizza and a case of beer... go with a djm or belltech...

 

[MOBS]

oooo, beeeer....NOW you're talking!!!