KevinL1987
OBS Enthusiast
I need some help. While chasing down a short that would cause my Illum fuse to pop as soon as I turned on my parking lights, I removed my gauge cluster so I can run a couple remote wires to the switch bank.
I had the truck running when I pulled the cluster, and I noticed that everything got dim, and the heater almost stopped blowing, so I re-insterted the cluster and it came back alive. My charge started going back up, and everything got bright again.
Is this normal on GMT400's?
I had the truck running when I pulled the cluster, and I noticed that everything got dim, and the heater almost stopped blowing, so I re-insterted the cluster and it came back alive. My charge started going back up, and everything got bright again.
Is this normal on GMT400's?