Truck cranks but doesnt start

[obsguy124]

The cap is fine, no cracks or anything just a little bit of play but not much to be concerned about. I'm thinking it may be the injectors ill have to take the intake off this weekend and take a look at them. If everything seems fine there ill take the front cover of the engine off to see if the timing is aligned with the cam well.

 

[SUBURBAN5]

If you mess with the fuel make sure you change the filter

 

[obsguy124]

Will do probably needs changing anyways.

 

[SUBURBAN5]

Btw 50-54 seems low to me. Mine was like 55 idle 60 driving.

 

[SUBURBAN5]

I hope one of these vortec wizards chime in

 

[obsguy124]

the 50-54 is only with the key in on position im sure it goes higher when the truck is running.

 

[obsguy124]

I hope one of these vortec wizards chime in

Yeah me too haha

 

[SUBURBAN5]

Have you done any mods or all stock? Also mileage?

 

[obsguy124]

Its all stock all it has is a k&n filter with the original airbox. The mileage is like 256k but was rebuilt around 180k.

 

[someotherguy]

That pressure is too low for the original poppet valve injector setup.

Richard