MrPink
Bainisteoir Páirteanna
I have a ton of custom things on my truck already, and will have more before it is done.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Thanks man, I really like how they came out. I had my dad paint them with epoxy primer, Nason base, and SPI clear.I love the color you did those in. Looks real good.
I ended up selling those 4 slot steelies since I had my heart set more on the rallys. Both were measured to be 15x8” and had the same BS, I assume the only difference is the 4 slots came on the base model trim levels and the rallys came on the higher trim levels.98chevy2500ss
The wheels in your picture are differnt than the ones you showed in the previous post. What happened to the 4 slot ones? Those looked like more back spacing. Does anyone have the width/backspacing on those? And those were 15” right?
They look skinnier than your painted rallies too. Are they?
Can you post link to where you found thisI need to get out of the rabbit hole!!! Check this out. This is something I found on another forum someone made so you can run hub caps on your rallye weeks. Pretty trick setup and the best of both world. Rallye weel looks better than the 4 slot and you can run hub caps! Also I learned that GM spelled it Rallye. Is that correct?
You must be registered for see images attach
You must be registered for see images attach
Can you post link to where you found this
Thanks man, I really like how they came out. I had my dad paint them with epoxy primer, Nason base, and SPI clear.
I ended up selling those 4 slot steelies since I had my heart set more on the rallys. Both were measured to be 15x8” and had the same BS, I assume the only difference is the 4 slots came on the base model trim levels and the rallys came on the higher trim levels.
Thanks. Im gonna try some expermenting with making something like that guy did and 22" transport steel wheelsIt was a few posts up but here ya go. Who’s gonna make this for us?!! What kind of clips do y’all think were used?
Hub caps with Rally wheels??? - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network
Page 2- Hub caps with Rally wheels??? The 1967 - 1972 Chevrolet & GMC Pickups Message Board67-72chevytrucks.com
Thanks. Im gonna try some expermenting with making something like that guy did and 22" transport steel wheels
By "4 slot" do you mean the long, narrow slots at the edge of the wheel center where it meets the hoop, as in a plain steel wheel? Those in 15" 6 lug for the squarebody 4x4's are 15x6 and for some reason appear to come in a 1/8" and 1/2" offsets. Couldn't tell you why.Glad you got what you wanted. I also prefer the look of the rally’s but the hubcaps are intriguing. I was hoping the 4 slots weren’t as wide and had more back spacing. From the picture it looked like it. The hunt continues!