stutaeng
I'm Awesome
Subscribed!
Awesome build!
Awesome build!
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I will check underneath the pcm again but I did not see it first time around.
I’m sorry if I wasn’t clear and thank you very much for the quick reply. I think the buffer boxes came into play with electric trans’ and I have seen them in the middle underneath the glovebox insert.
I showed a pic of my glove box and can’t seem to find consistency on location. My Speedo worked perfectly before the swap but I have swapped from a 2wd 700r4 to a NP208 cable drive.
I need to verify the pulse per mile setup so I can convert analog to digital signal.
https://tpiparts.net/inc/sdetail/10539/7586
This should work. I will look in the daylight but I didn’t see anything underneath pcm first go.
Thanks to all getting this sorted.
On 88 - 91 the buffer is on the back of the speedo cluster. The VSS is 2K PPM.I will check underneath the pcm again but I did not see it first time around.