stutaeng
Latest activity Postings About
-
-
stutaeng replied to the thread Rebuilding an engine - what precision instruments to do measurements.Well, back from the dead. I found another block already machined for about the price of what the machine show was going to charge me... -
-
Any welders out there care to verify if this block is really salvageable? This crack here would steer me away from using it.
-
stutaeng reacted to Erik the Awful's post in the thread confused about cam and lifters 93 4.3 tbi engine with
Like.
Solid flat tappet cams tend to be in race-only applications. You have hydraulic flat tappet lifters. Hydraulic lifters, both flat and... -
stutaeng reacted to Lou Merrell's post in the thread Problem on the 'limp' home yesterday. with Like.
Ok, new cat in on bank 2, new fuel filter, new downstream o2, new mpfi with all new gaskets, brake booster vacuum leak repaired...
-
I smacked mainly around the center, but towards the front as well. Thanks for your concern! I'm about ready to do a GoFundMe on these...
-
stutaeng reacted to Supercharged111's post in the thread Swap K3500 Front on K1500 Suburban? with Like.
Front upper arms inboard mounts are farther apart, mount farther inboard and higher on the frame, and the frame is taller. Front diff...
-
stutaeng reacted to Nad_Yvalhosert's post in the thread Swap K3500 Front on K1500 Suburban? with Like.
That's where it gets easy. All the pickups, as well as the 2 door SUV, and Suburban are the same length. The hex is the same too, 1500...
-
Do you know for sure you're hitting the bottom of the pump? I know where it is on my truck, but I don't know on the Suburban. When I...
-
Haha, thats cool, yeah that is what I was hoping. Normally I wouldn't be thinking about this sort of thing at this stage, but with only...
-
Nope, its a working class Hispanic neighborhood in the country. The district is still too soft on discipline for my tastes but at least...
-
Dropped a coworker off to pick up his 96 with a 5.7 this afternoon from the shop for leaving him on the side of the road.
-
Vacuum tubes Vacuum hose Now you know :waytogo: :biggrin:
-
stutaeng reacted to L31MaxExpress's post in the thread 1998 gmc sierra 305 vortec 411 swap question with Like.
They built 0411 run 305 vans. Because of the cat/02 sensor configuration its best to start with the 305 tune.
-
stutaeng reacted to Dropped88's post in the thread How to fid correct rear wheel bearing and seals with Like.
I've replaced quite a few sets in those rear diffs. Did they happen to sell you bearing and seal made together "correct" part. If so...
-
I've smacked it several times, no go.
-
-
Loading…
-
Loading…
