Yeetsmyfeets
Newbie
Wait. Can I say check balls? Can you say balls?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
It bangs
I'll do that. The PO said he checked the servo and it was fine, but man, I can't think of what else it could be. Hopefully the band is alright, the PO parked it as soon as it began slipping and I've only driven it in (D) so fingers crossed.i'd check servo for torn seals, mainly the 4th piston. sonnax makes a "D" o-ring kit that is a nice upgrade for the seals here: 77767K-SK. use lots atf and/or Vaseline when installing, you can clean up any sharp edges with green scotchbrite.
just remember even if you fix the slip the band may be compromised so don't be surprised if you fix it and the problem returns...
I would look at the 2-4 band apply pin length may be long enough to apply 2nd but not long enough to apply 4th ran into that once in a 700r4.