So, after seeing
@1ton-o-fun do this, I am going to steal his idea.
List of wants for my Burb:
Go back to stock 16" wheels.
(400 steelies, 800 steelies, or PY0s. Not super picky at this point.
@HotWheelsBurban if you still have your PY0s in couple of months, I'll happily snag them.)
Buckstop front winch bumper
Warn M12000 for the Buckstop bumper
Swap to a set of XG torsion bars to properly support the bumper and winch
Pair of 6" KC Daylighter lights on the bumper
(I already have a pair that have never been installed)
110 mph cluster (just to be slightly different)
NV4500 swap.
(Or my pipedream want, an S6-650 from an 8.1 or Duramax. Yeah,
real likely
)
NP241 swap, delete everything related to Autotrac
F*&d F-250 center console, for more utility
Custom upholstery utilizing Carhart fabric
Add in heated rear seats
Install my existing CB, and run it w/ a 108" whip
I'm seriously considering swapping to the work truck front end, I really do like how it looks.
I'd like to get a storage drawer system in the back
Some good quality tint, probably 35% all the way around
Roof basket with some LED floods, and a couple of longer range LED spots up front
F*&d auxiliary switches, 6 bank and 4 bank from a Superduty
Extra fuse and relay block to properly wire in all add-on electrical accessories
Dual batteries, big 3, hi-4 mod
Build my 454 into a 489
Aluminum heads for heat dissipation
Mild RV/towing cam
Headers, Magnaflow dual in/dual out muffler
411 swap
285s w/ 4.56 gears
GMT800 rear disk 14 bolt ff axle
GMT800 HD spindles w/ slip-fit rotors and 2 pot calipers
List is subject to change as I get new ideas