Murray Replacement Radiator From Oreilly

[DixieWASP]

Does anyone have experience using a Murray replacement radiator from O'Reilly's Auto Parts?

 

[mattillac]

About ten years ago I installed one to replace my factory unit.

You must be registered for see images attach

Murray (from O'Reilly's) is on the left, old one is on the right.

It was cheaper at the time for the thicker one so I went with it.

Haven't had any problems thus far, supposedly has a lifetime warranty.

 

[DixieWASP]

About ten years ago I installed one to replace my factory unit.

You must be registered for see images attach

Murray (from O'Reilly's) is on the left, old one is on the right.

It was cheaper at the time for the thicker one so I went with it.

Haven't had any problems thus far, supposedly has a lifetime warranty.

Thanks for letting me know.

 

[Schurkey]

I put one in the '03 Trailblazer a couple years ago, along with the new A/C condenser. Both were Murray, both came from O'Reillys. Pretty sure both were disappointinly imported. But in terms of function, "So far, so good."

 

[DixieWASP]

I put one in the '03 Trailblazer a couple years ago, along with the new A/C condenser. Both were Murray, both came from O'Reillys. Pretty sure both were disappointinly imported. But in terms of function, "So far, so good."

Thanks for letting me know. I am glad to know they are performing well for you.

 

[Dropped88]

Murray rad in our 04 Tahoe, is much better quality then other parts store and also have a Murray condenser in our 03 suburban, excellent quality

 

[DixieWASP]

Murray rad in our 04 Tahoe, is much better quality then other parts store and also have a Murray condenser in our 03 suburban, excellent quality

Thank you for telling me!

I see the photo of your blue truck. What inch drop do you have and is it a Belltech drop kit?

 

[Dropped88]

Thank you for telling me!

I see the photo of your blue truck. What inch drop do you have and is it a Belltech drop kit?

I don't have that one anymore but it was a djm 4/6 kit

 

[DixieWASP]

I don't have that one anymore but it was a djm 4/6 kit

I like the stance and thank you for answering my question.

 

[Dropped88]

Welcome and that's what this forum is for