Lunchbox Locker in the front 9.25" IFS

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

PlayingWithTBI

2022 Truck of the Year
Supporting Member
Joined
Jan 3, 2019
Messages
9,728
Reaction score
15,173
Location
Tonopah, AZ
That's an 8.5" 10 bolt.
Yep, other than counting 10 bolts on the cover and the ring gear, the little dog ears on each side of the housing bottom tells us it's the 10m bolt.

You must be registered for see images attach
 

yevgenievich

I'm Awesome
Joined
Jan 21, 2021
Messages
940
Reaction score
1,512
Location
TX
I was under the impression that the 9.xx" housing could take it?
That was my original hope. From general research, straight line pulling appears to hold up; however, actual challenging off road not so much. I still would get electric locker if it was still available.
 

Supercharged111

Truly Awesome
Joined
Aug 20, 2015
Messages
12,817
Reaction score
15,713
That was my original hope. From general research, straight line pulling appears to hold up; however, actual challenging off road not so much. I still would get electric locker if it was still available.

It definitely takes it better than the 8.XX" housing. Last I checked they quit making air lockers because the housings would just explode.
 

stutaeng

I'm Awesome
Joined
Aug 7, 2019
Messages
3,410
Reaction score
4,351
Location
Dallas, TX
So the only option for the GM 9.25" IFS is the ARB air locker, right?

I asked about the difference between the GM 9.25" and the Ram Power Wagon 9.25" solid front axle with their E-locker. I can't remember what I read though. Some guys were saying it would fit but some others said it wouldn't...
 
Top