24c3
OBS Enthusiast
the pressure switch is set to cut off at 150psi. i dont have a guage on the tank so i dont know how much pressure is actually building or putting out. I do know that i can lift it all up drop the front and have enough pressure to lift the front to ride hieght before the air runs out.
I didnt install my set up.... but the plan is to take the bed off next week and redo the wiring, replace the relay and pressure switch , add two more valvues(6 total), and gauges for the front back and tank, and remount the compressors with rubber groumets.
I didnt install my set up.... but the plan is to take the bed off next week and redo the wiring, replace the relay and pressure switch , add two more valvues(6 total), and gauges for the front back and tank, and remount the compressors with rubber groumets.