Experience with this crate engine company?

[PlayingWithTBI]

Getting concrete suitable for a 2-post is difficult.

I'm thinking I should be good there, my shop floor is 6" thick 3,000psi. If not I guess I can always plate it.

 

[Schurkey]

What does the lift manufacturer recommend for concrete?

 

[RDF1]

All the lifts I've been looking at (10,000# and under) only suggest 4.25" thick 3000 psi concrete.
When I poured my shop I made my lift area 8" thick with double wire and some extra rebar under it.

Sent from my HiDiNg PlAcE