You must be registered for see images attach
From when I was installing it.
You have to offset the fan by a couple inches which requires grinding off the factory mounts on the driver side so you'll clear the water pump. Also depending on how you shoose to mount the fan you will have to drill into the shroud so keep that in mind. Crown vic fans are a one piece deal so its a fan and shroud combo.
Also, you want to use a fan from a 98-02. Civilian or police model, the fans are the same. 98-02 are two speed for 03+ you'll need a fan speed controller since they are variable speed.
Yes I know I need to make a rad cover. I'm getting to it.