Stepside_fever95
I'm Awesome
And how much of the fins did you have to remove?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
The only kit I found said it was for a k2500 8 lug would that still work for a 1500Any updates?
did the sway bar not have to get reattached ??i finally found the found the time to snap some pictures of the ebay diff drop installed on my truck.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
No you can leave the sway bar end links attached.... I just had them out because I was installing 2010 f150 sway bar end links
When it's bottomed out (the tire is stuffed up in the wheel well) does the CV seem to be pulling apart? In my mind it seem like the CV would be stretched out a smidge too much. I have zero experience dropping the front diff, very curious because I am always looking for ways to keep from destroying front CVs.I’m not going to lie this kit does make the front diff hang Down a good 2.5” maybe 3.5” idk,below the front frame cross member..... but two years later I don’t regret doing it one bit.... the old pictures I took made it look worse than it is with the goofy skid plate drop