I used some part's from this place, now I did not use the whole kit, but it is very similar though and I think it's not a bad price
http://www.ebay.com/itm/GM-Rear-Dis...uck_Parts_Accessories&hash=item518a2332e9 Anyway what I did on my 95 is this, it is 2wd 5 lug, first I did the Hydroboost swap with matching MC, then I added cross drilled and slotted rotor's up front with 1 ton caliper's with stainless braided lines, and in the rear I used kingtek bracket's with cross drilled and slotted Impala SS rotor's that I machined the stud's out for the 14mm truck stud's, and then I used s-10 caliper's in the rear, and no I don't have an e brake. I also used stainless braided lines in the rear from Kingtek as well. Also I went to the salvage yard and got a proportioning valve from an 03 2wd 4 wheel disc Tahoe for $10 and installed it on my 95. My truck will stop on a dime and I have $425 invested in the rear disc swap.