Tech-GeeK1500
I'm Awesome
So I just finished pulling the entire A/C system from my truck and installed a bypass pulley. I'm leaving the evaporator core in so I have the two connector lines still just barely sticking out of the firewall (from the bottom line and the accumulator up top). Does anyone make caps that fit these connectors to keep gunk out of the evap core?
Furthermore, does anyone have any suggestions on what to do with the left over electrical plugs? I assume just wrap them up tight in electrical tape and zip tie them out of the way. I removed my air conditioning because it hasn't worked in years, and my standard cab cools off just fine with open windows. I also pulled the condenser when I started restoring the truck last summer. It's a 1998 K1500 with the 5.0L Vortec. Thanks for any input!
Furthermore, does anyone have any suggestions on what to do with the left over electrical plugs? I assume just wrap them up tight in electrical tape and zip tie them out of the way. I removed my air conditioning because it hasn't worked in years, and my standard cab cools off just fine with open windows. I also pulled the condenser when I started restoring the truck last summer. It's a 1998 K1500 with the 5.0L Vortec. Thanks for any input!