Can mount replacement issue

[Caman96]

I bought them off LMC truck

You must have had them for awhile cause the uppers(front and rear cab) haven’t been available for a long time.

 

[Logan R]

Ok I’ll get some pictures then here soon

 

[Logan R]

And I found them pretty easy on LMC truck. The only thing I couldn’t find easily was the retainers otherwise I found everything else easy

 

[FullBlowncustoms]

Was cab removed? or just jacked up? Were the doors CLOSED if and when jacked up?

 

[Logan R]

Can stayed on, most times I think door was open when I lifted the cab up. Next post I’ll put up all the pictures I took. They are all of the drivers side door/panel steel I replaced

 

[Logan R]

The one where the body lines are off is when the door is closed. Door gap is super wide at top and pretty narrow at bottom of door when closed

 

[Logan R]

#2

 

[Logan R]

The final pictures

 

[FullBlowncustoms]

you have to lift the door to close it?

 

[Logan R]

Pretty much, it will close, but it is sagged down from the door striker a good inch or so. You can force it shut by just pushing it.