arrg
I'm Awesome
I think there are enough of us on here with the EBL to hand hold you through it. If not, BobR from Dynamic EFI is pretty responsive to questions. The installation/how to get started instructions are pretty good.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Real simple, with KOEO, open WUD (What's Up Display), click on Display/Flash, then click on the "Select BIN" button, find your .bin you want, then the "Flash Bank" you want, and click on "Apply" (wait for it to finish, usually ~4 seconds). Then turn key off for at least 10 seconds for the IAC to reset itself, then you can start your engine.I guess it will become clearer once connected to the EBL how to flash bin?
8So, the wud program can store 7 bin files?
Don't stress, EBL is mighty user friendly. There's way more support now than when I had installed mine, that's for sure! We'll help ya.
More peace of mind on your compression - I had a Blueprint short block like yours, same part number, 3834, that ran 10.5:1 static compression. It passed NOx with flying colors. Looks like the one you bought has different pistons than mine. Mine had Keith Black hypereutectic dish pistons.