98 chevy 1500 engine issue

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Sepiroth

OBS Enthusiast
Joined
Jan 26, 2011
Messages
60
Reaction score
2
Location
Indiana
Back before when, I used to line up the tip of the dist. rotor to the first cyclinder on the divers side. That was after i found TDC compression stroke
 

FastOrange

OBSless
Joined
Jun 17, 2010
Messages
5,877
Reaction score
237
Location
Williams Lake
Back before when, I used to line up the tip of the dist. rotor to the first cyclinder on the divers side. That was after i found TDC compression stroke

doesnt matter where the rotor is, in fact, you could make the rotor facing the firewall if you wanted too, as long as the terminal its pointing at is the one you use for #1
 

Dougm72

bout 5ft from concrate
Joined
Dec 14, 2010
Messages
247
Reaction score
0
Location
Kentland,Indiana
hello guys and gals.. i know its a very old post but i thought i would put here that i did get the truck going it was around 05/14/11 and she has been running like i top besides one day i broke a tie rod end and both ball joints on the passanger side.... lets just it was one hell of a ride..
 
Top