okayy. so heres a bit of a pickle i got myself into.
SHORT STORY : my OE pump uses the 6an fittings im going to assume. i got a pump module with push on fittings. got my digital caliper out. Return line is 5/16 and the feed line is 3/8th. need to buy
https://www.amazon.com/Russell-640853-Quick-Disconnect-Female-Fitting/dp/B001P2CKVY <3/8th
and
https://www.amazon.com/Russell-644113-EFI-ADAPTER-FITTING/dp/B005C6KTBW <5/16th
will these work for me? i have 1 hr and 15 mins from this post till then to have it delivered via amazon tomorrow
Long story
my pump came. ACDELCO MU1605. conflicting info on many websites but amazon says it doesnt fit my car. purchased it. took the 180 dollar cactus up the ass for this pump. dont fit. need those conversion parts i assume above to make this thing work. after digging around they claim this is for a 95/97 yukon. then i hear its for a 4 door. but im at a stump because 95 was TBI and 97 was vortec. does this ******* thing have a 60psi pump? who knows. tried to return it. they want to charge me 40 bucks from my return for restocking fees. told them to go **** themself with a barbeque grill. so now i have this damn pump. was gona keep it and ordered the ep381 as mentioned above. got it. cant figure out for the life of me how to disassemble this fuel module. so i can try to identify the pump inside it. and even if it is indeed a 60psi pump. but had to order the sending unit for my shitbox. was supposed to come saturday. was like yay now i can get my truck done this weekend. got kicked in the dick. it still hasnt reached denver yet. and im getting tired of the bullshit and just want my truck to run again. so in a quick rundown i have
a complete EP381 pump
a complete MU1605 from ACDELCO
i am ******* tired of the bullshit and just want my truck to run.
i looked thru alldata and 96/97 use senders for 0empty - 90ohm full
this pump by many websites claim its for a 95-97. MAYBE GM put a 60psi pump in here.. im going to assume so
my only ******* problem is my lines are different. i am a wiring pro so wiring dont scare me. im just worried about line fittings. anyone have any info to chime in thanks i appreciate ya.