89 Cheyenne aka Sour Girl

[Devs93]

How much were those


Sent from my iPhone using Tapatalk

 

[dagen_1]

How much were those


Sent from my iPhone using Tapatalk

$179 w/free shipping. (both rotors and premium ceramic pads)

 

[dagen_1]

a tiny bit of progress to report.

had my hydraulic hoses made this morning. (main leader hose to water traps, then water traps to tank, and then the short one to bridge the two tanks)

You must be registered for see images attach

and then there's this costly lil devil right here

You must be registered for see images attach

 

[DRAGGIN95]

Nice, that's the way I do mine too with hyrdo. hose.

 

[dagen_1]

Nice, that's the way I do mine too with hyrdo. hose.

any suggestions on securing it to the frame? i thought about those line clamp thingys that are normally used for brake lines or fuel lines (in a bigger diameter of course) but wasn't sure about drilling all those holes in my frame.

 

[DRAGGIN95]

I use the steel line clamps with the rubber insulator, there are enough holes in the frame from the factory that I usually don't have to drill any.

 

[DRAGGIN95]

I use these http://www.oreillyauto.com/site/c/d...oap?ck=Search_N1766_-1_800&pt=N1766&ppt=C0142

 

[98nightmare]

I used insulated line clamps too, from Home Depot in the wiring section. Love em!

 

[98nightmare]

I freaken love your lines bro!

 

[dagen_1]

I use the steel line clamps with the rubber insulator, there are enough holes in the frame from the factory that I usually don't have to drill any.

i didn't think of existing holes... thanks!

I use these http://www.oreillyauto.com/site/c/d...oap?ck=Search_N1766_-1_800&pt=N1766&ppt=C0142

I used insulated line clamps too, from Home Depot in the wiring section. Love em!

i'll be going by lowes soon if i can't find them at the parts store (lowes is an hour away)

I freaken love your lines bro!

i think he did a good job! he's also parting out an 88 OBS that im interested in buying for parts for the silver truck.