88 GMC Trail/DD Rig

[88GMC]

I have to set my rad support on the front end to mock up the final winch location on the plate still. Then throwing a bunch of plate and tube at it. Overkill is the only way I do things.

 

[88GMC]

Long overdue updates.
14b is geared and under the truck. Onto the 60.

You must be registered for see images attach

You must be registered for see images attach

 

[94Sierra4x4]

Sick man. This thing's going to be a show truck by the time your done Hopefully you don't have too much trouble getting her dirty! Haha

 

[88GMC]

Thanks man. Still making some progress. Just kinda creepin along while I wait for parts. Made a case spreader while I'm waiting on set up bearings and OX parts.

You must be registered for see images attach

 

[96-1500]

Just read the whole thread.

Wow.

That is all. Carry on.

 

[88GMC]

So got some work done. 60 is geared now. Found a small crack in one of my factory knuckles so I ordered up a set of Reids. Started piecing it all together.

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images

You must be registered for see images attach

 

[88GMC]

Well I got both knuckles on and torqued down. Then stuffed the shafts in. Had to do a ton of massaging on the caliper brackets to get them to fit against the new knuckles. Just gotta order up some rotors to install the hubs and the front is ready to go back under the truck.

You must be registered for see images attach

Ran into some slight NY problems with my 94 so I will be putting the new chassis on hold for a bit while I rebuild the 350HO in my 88....with some goodies of course

 

[88GMC]

Well taking a break from the new chassis.
Hmmmm....

You must be registered for see images attach

Sent from my iPhone using Tapatalk

 

[TylerZ281500]

BUMP!!!!!!!

 

[TylerZ281500]

bump again! =(