Cpayne
Newbie
Any one on here have a way to get in touch with Lextech. I'm needing pin out sheets. Thanks
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I have the information somewhere. I’ll look it up and send it to you. In the meantime I have a 411 unit that I never used. I ended up going for a an ls swap and used the gen III/IV pcm. He had the conversion sheet for that as well.Any one on here have a way to get in touch with Lextech. I'm needing pin out sheets. Thanks
Echoing this; I messaged him on LS1Truck for a pinout on my 96 K2500; he got back to me within a couple days.If you go back 5-10 pages in his thread there's another forum he seems to be more active on, I want to say it was LS1truck.com but it's been a long time. Wherever it was, I reached out to him there and got a response.
https://www.gmt400.com/threads/12200411-pcm-swap-for-1996-to-2000-gmt400-trucks.9644/
He used to give the pinouts for free, I don't know if he still does but I don't think he's really making that much off of the pinout alone.At what point will it be ok for people that have the pin out information to share it. I have also tried to contact this guy in the past with no luck. I would think after all this time, he’s made his money.