nicholashasbrook
Newbie
You must be registered for see images attach
I have a 95 suburban and a buddy tossed this old thing my way but i'm not sure on mounts anyone have any clue?
need help mounting brush guard
- Thread starter nicholashasbrook
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
east302
I'm Awesome
Is it for an 88-98? Got a brand name or sticker on it?
They usually have a bracket with two holes that go in place of the tow hooks. Some have two smaller ones that fit above the bumper and attach with the bolts on the bumper top filler panel.
That almost looks like it would bolt into the bumper itself.
Sent from my iPhone using Tapatalk
They usually have a bracket with two holes that go in place of the tow hooks. Some have two smaller ones that fit above the bumper and attach with the bolts on the bumper top filler panel.
That almost looks like it would bolt into the bumper itself.
Sent from my iPhone using Tapatalk
nicholashasbrook
Newbie
You must be registered for see images attach
thats the sticker and I'm almost certain it came off a mid 90s gmt
east302
I'm Awesome
They may be able to identify the application based on the model number.
Here’s what they have/had for the 400 line, maybe it will help see what’s missing.
http://ftp.luvernetruck.com/Product..._Grille_Guard/gm_wraparound_grille_guard.html
http://ftp.luvernetruck.com/Product...und_Grille_Guard/GG200827-200858_-200854-.pdf
Sent from my iPhone using Tapatalk
Here’s what they have/had for the 400 line, maybe it will help see what’s missing.
http://ftp.luvernetruck.com/Product..._Grille_Guard/gm_wraparound_grille_guard.html
http://ftp.luvernetruck.com/Product...und_Grille_Guard/GG200827-200858_-200854-.pdf
Sent from my iPhone using Tapatalk
You must be registered for see images attach
You must be registered for see images attach
As you can see the bottom bolts in with bumper bracket bolt. The top hooks to bumper and bolts back towards brush hairs to clamp it in place. I can take pics of other pieces I have at home later today.
Made it home, here are the brackets I was able to get off easily from drivers side thanks to the grill to bumper void trim piece being busted and half missing. The bottom one on this side was obviously fabricated, the tops would be a little harder to make.
The top bolts I had to cut to get the thing off but here’s a pic of how the nut works on guard side
You must be registered for see images attach
You must be registered for see images attach
The top bolts I had to cut to get the thing off but here’s a pic of how the nut works on guard side
You must be registered for see images attach
steven1193
Newbie
- Joined
- Mar 28, 2014
- Messages
- 1
- Reaction score
- 0
Those bottom brackets are exactly what I need. I took a guard off of a junkyard truck and those brackets were bent horribly. Are these off of the same Luverne model that the OP posted? Or any idea how to get a hold of a set of them?
It was a slightly different luverne gaurd, but only because the middle part had a spot for fog lights to be mounted. The rails that attached to the number were the same. I’m not sure where you could get some, but I know one of the ones I took off was fabricated out of steel plate and didn’t look too hard to make.
Similar threads
Members online
- PolarBear
- LetsGoBrandon
- heyitzjoel
- SlamTheMan
- Erik the Awful
- Cheezebandit
- 89RCLB
- The_Full_Monte
- 1998_K1500_Sub
- PlayingWithTBI
- Carlaisle
- 95Noobie
- Alteca
- jays96
- hatfield198
- the_elegant_fox
- 1996bluegreychevy
- Rdbernh
- 98whitefsc
- vince72
- THOMASO1371
- Juliosk
- 1990Z71Swede
- l1lartur0
- rosert
- OutlawDrifter
- Supercharged111
- Obschevy95
- rumbler425
- Road Trip
- 99xcss4
- Tan1998K2500
- selland74
- Keeper
- Nephrodoc
- Ryvax
- 454cid
- kenjad96
- NMK42
- Pclayton89
- warbird
- Heavylikeachevy
- caw_86
- skylark
- crusty
- shablagoo_gabagool
- Caman96
- gilly327
- GMCGerbil247
- MarKist