Installed aluminum radiator and now cannot adapt OIL cooler lines...motor oil not transmission those are fine. They are not quick connect they are oring nipple. someone out there has had to put in an aluminum radiator right???
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
"THEY"? They, the oil cooler hoses? or they the fittings in your new radiator? On my vehicle, both sides were the correct O-ring-sealed fittings. The radiator had the correct fittings to accept the tube-and-O-ring. I'm thinking the nut holding it all together is 13/16 hex, but I had to buy 20mm tools to get it apart--one nut was seized in the original radiator. The other came out with some effort. The 20mm fit tighter than the 13/16.They are not quick connect they are oring nipple.
I find myself in the same situation as you Erik.