William Keiter
Newbie
Any tips or tricks to replacing the bushings on your own. I have a small door holder I bought from a guy that you can put on a jack...don't know about doing them without someone holding the door.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Any tips or tricks to replacing the bushings on your own. I have a small door holder I bought from a guy that you can put on a jack...don't know about doing them without someone holding the door.
I did mine with an overhead crane at work. That BS of having you wife balance it on a jack while you replace the pins, is not a good idea. These doors are not easy to balance, and they are heavy. About 80 LBS each.Do you have or know anyone with access to an engine hoist? I did mine with one and a ratchet strap.
I did mine with an overhead crane at work. That BS of having you wife balance it on a jack while you replace the pins, is not a good idea. These doors are not easy to balance, and they are heavy. About 80 LBS each.
Any tips or tricks to replacing the bushings on your own. I have a small door holder I bought from a guy that you can put on a jack...don't know about doing them without someone holding the door.
I keep reading threads about this, and I didn't see anybody give feedback on the aluminum pins with grease fittings. I just installed them, seem to be working fine.
You must be registered for see images attach
You must be registered for see images attach
Its not just the very top hole on top hinge its also the very bottom hole in bottom hinge.