Water Methenal injection install

[94Sierra4x4]

I've never seen this before crazy. Whats it cost to set up something like this?

 

[sewlow]

This is a pretty good explanation, with a method of setting up such a system. This is from New Zealand, so the mileage is calculated with imperial gallons, which is 20% larger than a U.S. gallon.

http://www.dave-cushman.net/misc/mannject.html

Here's the systems from SnowPerformance. These have come a long way since I've used 'em. Much more sophisticated than the Edelbrock kits, which are still available.

http://www.snowperformance.net/gasoline

 

[Bearcat91]

This is a pretty good explanation, with a method of setting up such a system. This is from New Zealand, so the mileage is calculated with imperial gallons, which is 20% larger than a U.S. gallon.

http://www.dave-cushman.net/misc/mannject.html

Here's the systems from SnowPerformance. These have come a long way since I've used 'em. Much more sophisticated than the Edelbrock kits, which are still available.

http://www.snowperformance.net/gasoline

Intersting DIY...im too scared to try it lol

 

[Aloicious]

most of the OP's gains from the meth injection system is coming in the form of a chemical intercooler, he is running a supercharger, so the cooling of the intake charge and help with reducing predetonation is giving him the large HP gain. while there are still some good benefits to running a h2o/meth injection on a non-forced induction motor, you shouldn't expect to see that kind of power gains.

DIY setups are not too hard with a good controller, there are several quality controlers, or kits that are out nowadays, along with snow performance, here are a few other companies that are around:
http://www.alkycontrol.com/
http://www.alcohol-injection.com/en/
http://www.coolingmist.com/

 

[D_EATON]

when i dynoed it on the 305...flipped a switch and got 40 extra rwhp from regular windshield washer fliud, 33% methanol...not even boost juice which is 50/50 mix

great truck, would u say the water/meth lit is worth it? i have been considering it on my c1500, mainly to keep the iat down and assist in cooling the 144. snow performance makes a kit for single carb roots blower style which is what i have.

 

[GMRedline]

great truck, would u say the water/meth lit is worth it? i have been considering it on my c1500, mainly to keep the iat down and assist in cooling the 144. snow performance makes a kit for single carb roots blower style which is what i have.

Meth/water injection would make a huge difference on your setup. Run it preblower and it will keep everything cool and increase the octane rating of your fuel.

 

[D_EATON]

Meth/water injection would make a huge difference on your setup. Run it preblower and it will keep everything cool and increase the octane rating of your fuel.

Yeah I was looking into the stage 2 kit from snow performance and it comes in right above blower and after carb, Looks to be a nice kit. Also have seen a lot of guys running the msd btm on their set up's.