TCBRacer77
Latest activity Postings About
-
-
Summit racing has a LS swap radiator kit with radiator, shroud, and dual fans with all the hardware for pretty reasonable! It's what I... -
TCBRacer77 replied to the thread A/C brackets for 5.3.Dirty dingo has a kit for sanden compressor mounted on passenger side
-
Yea 99% stuff I do is for drag racing. Only done a couple turbo LS for autocross style racing. Just finished a 5.3 .030" over with...
-
TCBRacer77 replied to the thread Got my 5.3! Just sharing….Money was assumed hahaha, but just wondered specifics, that’s for the drag strip I assume, I haven’t heard of much for like road race...
-
Money :) Dart LS Next Block 427ci 4.125" Bore x 4" Stroke 274/280 .712"/.698" 114 cam Johnson solid roller lifters CID Intake - 123mm...
-
TCBRacer77 replied to the thread Got my 5.3! Just sharing….How do you get an ls to run 8800 rpm lol
-
Its not needed unless it makes you feel better. I use the Melling one even in the race motors running 120psi oil pressure at 8800Rpms.
-
TCBRacer77 replied to the thread Got my 5.3! Just sharing….I was planning on using one of the aftermarket aluminum barbells
-
Ive never seen one fail. But it has been left out on a rebuild and causes oil pressure issues.. as in zero oil pressure haha.. But It is...
-
I need to lookup my receipts, but we did one of the fancy Mellings and it had 60+ psi at idle hot. I made the call to switch to 5W-20...
-
TCBRacer77 replied to the thread Got my 5.3! Just sharing….This is what came with the engine and just so happened to be the right one for an obs
-
-
I used the M295 on several builds and they usually had lower oil pressure than id like to see so i started using the M10295 and no...
-
TCBRacer77 replied to the thread Got my 5.3! Just sharing….I noticed the M10295 is a Melling standard volume +10 psi oil pressure, is that something necessary for a mild build? I’ve heard melling...
-
That will be a great cam for all around use. I dont care for the cams that only have a noisy idle. I go for practicality. I put a Cam...
-
I shoot for .0015" on rods and .002" on mains for 5w30 oil and M10295 oil pump in a Iron Block daily driver.
-
-
Loading…
-
Loading…
