dirty
Newbie
Has anyone put strobes in the upper corner lenses?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I see. I will be running stock Amber bulbs in mine. I know 194 LEDs are a little longer so I'll just have to look at real careful to decide what to do. Also do you have pictures?I installed one of the sockets risers from a set of chrome clear corners a guy sent me. Clearance is tight. I like the idea of putting the socket riser on the grille. Only problem I can see is lack of sealing between the corner light itself and the grille. I can see moisture getting in real easy unless you use a thick rubber seal but that seems just thrown together. Up to you how you choose to do it.
Sent from my XT1254 using Tapatalk
Do you happen to have any pictures?Thankyou
I had just the hole for a long time with a metal clip holding it but they always leaked water inside. So I cut the socket out stock corner and epoxy it to not the corner it self but the grill. So all four corners are twist sockets
Sent from my SM-G900T using Tapatalk
I have a low profile LED bulb. It's a flat 8 chip setup in a 194 base. It is half the height of a normal 194 bulb. I don't have any close ups. I'll get some tomorrow.I see. I will be running stock Amber bulbs in mine. I know 194 LEDs are a little longer so I'll just have to look at real careful to decide what to do. Also do you have pictures?
It does it on the top and bottom? That's odd. Change some bulbs out, check your contact points in your sockets (they can get really corroded and green) and check all your wires.Does anyone have a problem with the lights staying on? If I wiggle the wires around near the socket, the light will go out. I don't know what the problem is. Top and bottom?
That would be great man thanksI have a low profile LED bulb. It's a flat 8 chip setup in a 194 base. It is half the height of a normal 194 bulb. I don't have any close ups. I'll get some tomorrow.
Sent from my XT1254 using Tapatalk