canadakustom
Newbie
They look something like this turned off
You must be registered for see images attach
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Sweet. Now if I'm reading correctly, the top and bottom corners will both flash? Also more importantly, do you have to tap into the parking lights on each respective side in the same way?My smoked lenses and chrome reflector ones I did. Didn't turn out too bad.
Sent from my XT1254 using Tapatalk
I did headlights corners and turns are all led tooHas anyone ever done this with these types of corners?
You must be registered for see images attach
Those look damn good. That's it I'm doing it. Did you do yours by just drilling a hole for the bulb or did you epoxy a socket into the corner lense? That's kinda the jist I'm getting from this thread, is that those are the two ways to do it.I did headlights corners and turns are all led too
You must be registered for see images attachYou must be registered for see images attach
Sent from my SM-G900T using Tapatalk
ThankyouThose look damn good. That's it I'm doing it. Did you do yours by just drilling a hole for the bulb or did you epoxy a socket into the corner lense? That's kinda the jist I'm getting from this thread, is that those are the two ways to do it.
I installed one of the sockets risers from a set of chrome clear corners a guy sent me. Clearance is tight. I like the idea of putting the socket riser on the grille. Only problem I can see is lack of sealing between the corner light itself and the grille. I can see moisture getting in real easy unless you use a thick rubber seal but that seems just thrown together. Up to you how you choose to do it.Those look damn good. That's it I'm doing it. Did you do yours by just drilling a hole for the bulb or did you epoxy a socket into the corner lense? That's kinda the jist I'm getting from this thread, is that those are the two ways to do it.