smrr1
wait for it...
So i noticed my truck looked a bit unlevel so i went to play with the bars. Found driver side almost completely unscrewed and passneger side almost screwed in all the way. Here is the problem. I tinkered with them and measured multiple times and the truck is close to right. However drivers front and passenger rear measure higher and passenger front/driver rear measure low. I am confused because raising the driver front should lower the passenger rear but the driver front is already higher than passenger front. So raise the passenger front right? Nope, driver rear already lower than passenger rear. Just trying to make fronts equal and rears equal but 1/2 higher in rear. Not trying to lift the front or anything. Plus is it a sign of a possible issue that the bolts are at about a 3/4 difference? Thanks.