TagAllen
I'm Awesome
- Joined
- Mar 27, 2014
- Messages
- 198
- Reaction score
- 93
Need to figure out how to go from the stock 95 TBI fuel lines to hoses that end with 3/8NPT for a pressure regulator with return provision. I do not want to cut the hard metal lines. I want to use adapters so I do not have fuel hose blowing off cut metal lines just held on by simple clamps. I want to use my stock in tank pump to run a carb is why I want to use a regulator. After the regulator to the carb its only 4-6 psi so I am not as concerned. Are there hoses already made for this?