Thunderstruck20
OBS Enthusiast
- Joined
- Aug 19, 2011
- Messages
- 77
- Reaction score
- 14
I have a 1991 GMC K2500 with IFS running military 2 pc. Humvee rims with 7" backspacing. My question concerns a solid axle conversion. I am unsure of whether to run a Dana 44 or a Dana 60. If the Dana 60 should I be looking for a '77.5-'79 with the narrower spring pad or will a post '79 with 36.5" work. I don't know much about the 44's because I was advised to go big or go home and can find almost no info on spring pad with for those axles. I have 2" machined steel spacers right now and don't know if there is going to be an issue running a wider pad width. Any advice would be appreciated, Thanks.