rehoward
Newbie
I am about halfway done with replacing my clutch in my 1993 K1500 4wd truck. What a chore it has been!
I finally got the cross over exhaust pipe removed, the drivelines removed, and now am ready to drop the 5 speed
trans and transfer case.
My concern is, can I just unbolt the bellhousing and shove the trans toward the rear of the vehicle or do I need to
completely drop them out as a unit to gain access to the clutch and flywheel? This really has been a job from hell
and I need to get it done. The truck is jacked up and sitting 12" higher so I am crawling around under it doing the work.
If anyone has tips for accessing the clutch for replacement and dropping the trans/transfer case I would really appreciate some advice.
Thanks for your help.
Randy
I finally got the cross over exhaust pipe removed, the drivelines removed, and now am ready to drop the 5 speed
trans and transfer case.
My concern is, can I just unbolt the bellhousing and shove the trans toward the rear of the vehicle or do I need to
completely drop them out as a unit to gain access to the clutch and flywheel? This really has been a job from hell
and I need to get it done. The truck is jacked up and sitting 12" higher so I am crawling around under it doing the work.
If anyone has tips for accessing the clutch for replacement and dropping the trans/transfer case I would really appreciate some advice.
Thanks for your help.
Randy