R
rehoward
Latest activity Postings About
-
-
Rrehoward replied to the thread No Battery Power At All.Hmm, did you send an image RichLo because if you did, it doesn't seem to have come through. I have had good luck with saving stuff as...
-
Rrehoward replied to the thread No Battery Power At All.Found the issue. Years ago I put a battery disconnect on the battery to eliminate parasite drain when I leave it parked for a long time...
-
-
RI just finished a very extended clutch replacement on my 1993 K1500 with 305 and 5speed manual trans. I did a whole bunch of other stuff...
-
Rrehoward replied to the thread O2 Sensor wire disconnected - 1994 K1500 350 TBI 4L60E.Ha! I got it. The new Y pipe had a provision for an O2 sensor and threw me off the track. The factory O2 position for my 1993 K1500 is...
-
Rrehoward replied to the thread O2 Sensor wire disconnected - 1994 K1500 350 TBI 4L60E.I am having the same exact problem. I replaced the exhaust Y pipe months ago and got stopped by winter weather. Now everything is dandy...
-
Rrehoward replied to the thread Clutch Slave Cylinder Question.I found this clutch bleed procedure on the web. It seems to be pretty well written and clear. Why Chevy went to this system I can't...
-
Rrehoward replied to the thread Clutch Slave Cylinder Question.So, remove the slave cylinder plug and let it gravity drain while keeping an eye on fluid level in the master cylinder reservoir so it...
-
Rrehoward replied to the thread Clutch Slave Cylinder Question.While looking at my new slave cylinder and the old one, neither seems to have a conventional bleed fitting. Instead, they both have what...
-
Rrehoward replied to the thread Clutch Slave Cylinder Question.Thanks for the detailed info Richard. I have found that working on my truck clutch replacement has been a total PITA and has been cursed...
-
Rrehoward replied to the thread Clutch Slave Cylinder Question.That is what I thought, but wasn't really sure. No instructions at all. A decent Sachs unit and that should be a good OEM quality brand...
-
ROkay, I am sure this sounds like a rookie question, but I am replacing the clutch slave cylinder on my 1993 K1500 pickup truck. 5 speed...
-
Rrehoward replied to the thread Exhaust Gaskets or Not?.Good stuff friends. I think I will check flange surface straightness on the new manifolds and if flat just bolt them on sans gaskets...
-
RI have bought brand new cast iron OEM type exhaust manifolds for my 1993 K1500 with the 305 V8. They came with exhaust gaskets but the...
-
Rrehoward replied to the thread Starter Question - 1993 K1500, 4WD, Manual Trans, 305 V8.Well, I contacted DB Electrical about a recommendation for a PG260 type starter for my 1993 and their application reference material...
-
Rrehoward replied to the thread Starter Question - 1993 K1500, 4WD, Manual Trans, 305 V8.Oh geez, I feel so out of date. I can see why the PG260 is the way to go. So much more compact and powerful. I personally would try...
-
-
Loading…
-
Loading…
