dcp1992
Instagram - @dcp1992
Well I went ahead and got one of the halos installed in the cubes and sealed up. Though I also separated one of the headlights and they are put together with a more heat resistant sealer so I took a lot longer to get it separated. But just as I thought, I need to slim down the cubes so in retrospect I should've slimmed down the cube before I sealed it up. So I'll do that with the other cube to get them to fit.
Here is me disassembling the headlights and getting them ready for baking and lense removal.
Also, like I expected, the 80mm halos are too big, I need at least 70mm. 69mm would probably be ideal because the space around the projector it just over 69mm but that's not possible without a custom ring. Though a 70mm ring will have a little give like my 80mm rinds did.
You must be registered for see images attach
You must be registered for see images attach
Here is me disassembling the headlights and getting them ready for baking and lense removal.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Also, like I expected, the 80mm halos are too big, I need at least 70mm. 69mm would probably be ideal because the space around the projector it just over 69mm but that's not possible without a custom ring. Though a 70mm ring will have a little give like my 80mm rinds did.