Post your lifted 2wd's!

[95C1500]

:blank:

 

[95C1500]

I also had to do this, didn't know it and i backed out the shop, turned and hit the brakes and they went to the floor. i almost ran into a tractor!

Any pics? I need to do this.

 

[oohunter04oo]

Any pics? I need to do this.

hit a tractor?

 

[oohunter04oo]

Hunter, how much do you have into that lift setup, like just the blocks and spindles, REALLY considering this on my '96

bout $400 i had the blocks, spindles were 350.

 

[95C1500]

No no.. of the bump stops things. If I do the lift I will need to make sure I take them off.

 

[FastOrange]

bout $400 i had the block

, that aint bad at all, my uncle has a lift shop so i can get blocks for free. hmmmm, what shocks are ya running?

 

[95C1500]

Go with the ones offered by RC.

 

[oohunter04oo]

No no.. of the bump stops things. If I do the lift I will need to make sure I take them off.

Haha I was just kidding!! I'll grab some pic In a little bit. Actually I just cut the head of the rivet off and knocked the bumpstop off and left the rest of the rivet in there. Lol but I was in a serious time crunch. Actually still have a few loose ends to tie up.

 

[95C1500]

Well keep me posted. I want to know how to do everything correctly

 

[oohunter04oo]

, that aint bad at all, my uncle has a lift shop so i can get blocks for free. hmmmm, what shocks are ya running?

I used the factory nbs 2in blocks and I actually have factory length shocks. You do not need longer shocks in the front but you should in the rear. But mine ride just fine plus there only a yr old!

Go with the ones offered by RC.

X2 that's the ones I have!