Options on fitting 20x9 5.71” back space +18 offset fitment for 2wd 6” front lift

[A97obs]

This is a question about front wheel options the lack of (Lifted) wheel fitment knowledge on my side brings me to this point.
I’m pretty aware any 33” clears with some particular trim on a 2wd spindle lift I’ve one done it …
Talking 20s Can anyone confirm in the (Front) a 20x9 or 20x10 +18 offset 5.71” back spacing will clear with 33x12.50s with all the normal lower bumper trim and lower fender trimming on a 88-98 2WD
Wether it’s 4” or 6” front lift

I just did 17x9 Motos with 33x12.50 on my 97’ last year with only a 4” spindle lift the wheels at that time were “0” offset and everything was good 33s cleared with the minor trim on control arms and bumper corner . I’m only finding and looking at
Moto metal 20s which don’t seem to have a 0 offset option in a 20” rim. I just wanna make sure wether I need a -18 -24 or a +18 offset
Wider and further wheel sticks out the more it’s gonna hit the fender and bumper corners but I was only touching a smidge with a 4” lift having that extra 2” on a coil spring should make a huge difference

The pic below is the 17x9s 33s with 0 offset I did on my 97” previously.

So it’s the same suspension I’m dealing with but trying to figure out a good offset for a 20x9 -20x10 Even if I have to do a 31x12.50

 

[A97obs]

I always felt like if I had the extra 2” coil lift it would have made clearance No issue .
Referencing 17x9 33x12.50 “0” offset

Comparing to how a 20x9 33” might be on the same truck but with a 6” lift
I just need to know what offset and back spacing to lean towards to put me in the same direction as I was with the 17’s shown

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Lmartinez7]

I am Looking for the same answer! I currently have a 99 Yukon 2wd lifted on 4 inch spindles. I had some stock 2010 Camaro ss wheels I believe front is 20x8 tire is 305/55/20. I am running 1.25mm spacers to convert 5x5 to the Camaro lug pattern. I don’t want to run the spacers anymore but don’t know what offset to get.