_nickjoseph
I'm Awesome
I’ll get back to u in 5 minutes lol I’m going try it nowYeah, I’d try blocking it and see how well that works.
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I’ll get back to u in 5 minutes lol I’m going try it nowYeah, I’d try blocking it and see how well that works.
I couldn’t block it off and test blow but I turned it on and can feel the air coming around the damper on all sides. Think that’s my issue? Still have air coming from the vent under the blower motor thoughYeah, I’d try blocking it and see how well that works.
When selecting front vents and defrost it comes around the damper on all four sidesYeah, I’d try blocking it and see how well that works.
If your by ur truck just look under the blower and it’s leaking from those vents. Should I seal it up?Yeah, that edge flap keeps that from happening. All those little leaks add up. Even when fixed it isn’t going to be a wind tunnel of air flow, but it does make a difference.
Not sure about your leak by the blower, that may be harder to find.
No not that. It’s where the vent door is behind the blower feels like right thereGot a picture?
Is the little hose connected between the blower and the blower case? Couldn’t find a picture of it, but one end connects here...
You must be registered for see images attach
Not my pic but those vent holes under the blowerGot a picture?
Is the little hose connected between the blower and the blower case? Couldn’t find a picture of it, but one end connects here...
You must be registered for see images attach
I’ll pinpoint tonight after work where it coming from and get back to you. How can I seal that damper but retain defrost. Can I glue thin rubber pieces to stop it?That’s the inlet on the fan, so air wouldn’t be blowing out that but you may be able to feel the suction when it’s on. The damper switches to either recirculate or fresh air. That wouldn’t be an issue.