Joaquin P
OBS Enthusiast
So I’ve recently tried my hand at rebuilding a 700r4 with no prior experience, overall the process was somewhat overwhelming but I put it all together and got it back into the truck. I made sure to replace all the clutches and steels, and whatever seals I could along the way. Through each step I rotated the transmission and everything was as free slowly as it could be. I now have it to where it shifts into all three first gears fine, but it doesn’t shift into OD at all. If I’m easy on the throttle it’ll shift through the gears at around 2.3k rpm pretty smoothly, but it won’t go into OD. Is there anything that can be done without having to drop the entire transmission again? If not, will I damage the transmission further by continuing to drive it as is? After this transmission goes out I’m probably going to convert my truck to a manual so I’m not all that worried about toasting it, I’d just like for it to not happen anytime soon if possible.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk