Dravec
Unashamed 400 addict. Best. Trucks. Ever.
Awesome. Thanks.I'm pretty sure they're the same
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Awesome. Thanks.I'm pretty sure they're the same
Anyone know any secrets for an oil pressure sending unit that is so close to the block that the socket won't fit???
Like, I desperately need help with this.
Yup. This is what I have. It won't fit between the sensor and the block. I'm afraid the sensor is cross threaded. Or it's maybe bent. I dunno. But the top broke off, so it has to come out and be replaced.I think this is what I bought.
When I was shopping, I read that some sockets aren't deep enough, so I think I took my new sender with me to Autozone.
Cap and rotor are off, but my problem is that the sending unit is just almost touching the block. Close enough the socket won't fully seat on the sending unit because of how close it is to the block.I used the Lisle sender socket on a 1/4" swivel head ratchet on my 4.3. You basically have to do it by feel, as was mentioned. If you remove the cap and rotor it's a bit easier...I think on my case that was the only option.