My truck is a 96 c2500LD 350/nv3500/14sf. 4/6 drop using djm upper n lower control arms with drop coils. Qa1 shocks upfront. Belltech c-notch with flip kit in the rear. Also has shock extenders n airlift helper bags. My problems is the truck won’t return to center after turning. It’s like I’m always fighting the wheel to get the truck to drive straight. From what I’ve read this is called memory steering and common cause is balljoint binding. All balljoints are new from djm and all steering components have been replaced except steering gear box but I was told it wasn’t worn out. Had the alignment done at a quality shop n they even rechecked the alignment after 5k miles n decided the balljoints were the suspect of the steering problem. They knocked the balljoints out n reinstalled them. That seemed to help for a week or two but a couple thousand miles n The steering won’t return to center without manually turning the wheel in the opposite direction of the turn. Anyone have binding on new balljoints? Maybe it’s the steering box? There is 2-3 inches of play in the steering wheel. Steering problem started after the 4/6 drop was installed
You must be registered for see images attach