LED Hazard/ Emergency Flasher Relay

[Ant704dreadhead]

Plug & play. DEWHEL 12V 0.02A-10A 2-Pin CF-12 Electronic LED Flasher Relay Fix for Turn Signal Light Fast Hyper Flash https://a.co/d/1vVNvTZ

Thank you for your help I greatly appreciate it! Last question.... did you change the hazard relay or the relay near the ashtray?

 

[jus10inbrla]

ummm.. i think . It was a round one iirc

 

[Ant704dreadhead]

ummm.. i think . It was a round one iirc

It was a round relay?

 

[Ant704dreadhead]

It was a round relay?

Or was it the one buy your got near the firewall?

 

[jus10inbrla]

I just went back in my log… ive never ordered any other relays. Everything ive ever done to the truck i have a logsheet on with dates & parts

 

[jus10inbrla]

Or was it the one buy your got near the firewall?

im a little unsure on your questioning… but i replaced 2 relays total, the ep36, and the cf12 2 prong stuck under dash

 

[Onizukachan]

Question. Mine works fine, hazards work fine, turns work fine ( they even do the little alternating flash in the vertical front corner) EXCEPT when you press the brake the hazards stop flashing.

i frankly can’t remember to 30 years ago when I last regualrly drove a domestic “shared turn and brake” pick ‘em up to remember if that was normal behavior or not?

 

[df2x4]

Question. Mine works fine, hazards work fine, turns work fine ( they even do the little alternating flash in the vertical front corner) EXCEPT when you press the brake the hazards stop flashing.

i frankly can’t remember to 30 years ago when I last regualrly drove a domestic “shared turn and brake” pick ‘em up to remember if that was normal behavior or not?

Completely normal on these trucks. Brakes override hazards.

 

[someotherguy]

Completely normal on these trucks. Brakes override hazards.

Yep, because brake and turn signal are the same bulb in this setup. Not like a GMT800 where the signal is a separate bulb. Gotta have brake lights, so they take priority on a GMT400.

Richard

 

[Ant704dreadhead]

im a little unsure on your questioning… but i replaced 2 relays total, the ep36, and the cf12 2 prong stuck under dash

Thank you for responding. I appreciate all your help!