I bought a L29 from Craigslist. I want to share what I have found out about this engine.
10237297 casting number on the block
10141297 casting number on the heads
Flat top pistons
Oval port intakes
4 bolt main caps
I measured the combustion chambers at 100cc
Using a CR calculator puts this cr at 9.4:1
This thing seems like it should make big power with the right cam and intake.
These heads actually look pretty good to me, if you can overlook the weight and the non-adjustable valve train.
Sorry if this is all common knowledge to everyone. This is the first gen 6 I have ever had. I was expecting dish pistons and peanut ports
10237297 casting number on the block
10141297 casting number on the heads
Flat top pistons
Oval port intakes
4 bolt main caps
I measured the combustion chambers at 100cc
Using a CR calculator puts this cr at 9.4:1
This thing seems like it should make big power with the right cam and intake.
These heads actually look pretty good to me, if you can overlook the weight and the non-adjustable valve train.
Sorry if this is all common knowledge to everyone. This is the first gen 6 I have ever had. I was expecting dish pistons and peanut ports