CamoGoddess13
Newbie
I have been having a issue with leaking from where the dip stick tube goes into the transmission. I am wondering if there is a gasket or something that I can replace? Any help would be appreciated
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Yep. And gotta get to back side of head to get bolt out that holds tube in.I think there's an o-ring on the tube. You have to pull it out to replace.
WHAT VEHICLE? What transmission?I have been having a issue with leaking from where the dip stick tube goes into the transmission. I am wondering if there is a gasket or something that I can replace? Any help would be appreciated
Dipstick tubes sealed with an O-ring have a tendency for the tube to crack where the groove for the O-ring is rolled into the tube. Essentially invisible until you remove the O-ring.OP didn't specify what transmission or year.
I believe the TH350/400 had the o-ring. The 4L60e & 80e have the little hat looking seal. Not sure of the 700R4, I've never been close enough on those to notice what they use. I would think it's the same as the latter.
The 700R4 also uses the "hat" seal.I believe the TH350/400 had the o-ring. The 4L60e & 80e have the little hat looking seal. Not sure of the 700R4, I've never been close enough on those to notice what they use. I would think it's the same as the latter.