I deleted the broken ABS module

[95 Tahoe]

Since the ABS was broke and couldn't be bled on my 95 I took it out. NO ABS is better than NO BRAKES. I used a proportioning valve made for disc/drum brakes in place of it. The brakes behave a lot better in a panic braking scenario. The 10" drums are probably a weak point but I'm happy with it for now.

 

[Orpedcrow]

We need pictures!

 

[Kchevys]

^^^^ What he said ^^^^

 

[95 Tahoe]

I'm not a tubing bender so be kind.

You must be registered for see images attach

 

[SUBURBAN5]

How did you wire the brake pressure switch?

 

[b454rat]

What was the prop valve from? Wanna delete ABS in all of mine....

 

[Supercharged111]

I'd tweak those tubes so they can't rub. Looks a lot like a stock TBI setup which is what I used to delete my ABS pump on my 1500.

 

[95 Tahoe]

How did you wire the brake pressure switch?

I haven't hooked it up yet. I found the old pressure switch on the ABS. It consist of 2 wires. I just need to figure out how to trigger the dash light. I'll look at that tomorrow

 

[95 Tahoe]

What was the prop valve from? Wanna delete ABS in all of mine....

I got it from Summit SUM-760182. There are probably cheaper options. I bought it because it came with the bracket and I thought the tubing would be a drop in. The tubing wasn't.

 

[95 Tahoe]

I'd tweak those tubes so they can't rub. Looks a lot like a stock TBI setup which is what I used to delete my ABS pump on my 1500.

There is a slight gap. The picture just makes it look like it's touching. I will probably bend them a little more.