borahshadow
I'm Awesome
- Joined
- Dec 4, 2010
- Messages
- 613
- Reaction score
- 23
I take it that this thread went no where after this????? My mirror should be here tomorrow and I need some help with wiring and sensor placement.
For your mirror the wiring is
Pink= Switched 12+
Black = Ground
Light Green = Reverse Lights
Green with Black Stripe = Temp Probe
Brown = Temp Probe
The other two aren't needed. (gray and something else IIRC)
That's how I wired mine up. It works for the Compass and Temp Mirrors that came out of one of a GMT-400 and probably other GM mirrors as well
I found this info in another thread. Credit goes to whoever posted it there.
Edit: I found it!
97 to 99 tahoe, suburban, trucks
GM / wire harness color / function
PIN 1 / PINK / POWER +12 volts
PIN 2 / BK / CHASSIS, GND
PIN 3 / LT GRN / BACKUP LIGHTS
PIN 4 /GY / TO AUTO DIM OUTSIDE MIRROR <---- dont need it!!! cut it..
PIN 5 / PINK / TO AUTO DIM OUTSIDE MIRROR <---- dont need it!!! cut it..
PIN 6 / DR GRN/WT / TEMP PROBE
PIN 7 / BK/WT / TEMP PROBE
Note: Pin 3 is to be connected to the backup lights to turn off the auto dim feature in reverse.
If you intend not to use this feature connect the LT GRN wire to chassis ground. If this pin is floating the auto dim will not work properly.
i just put one in my truck this weekend and love it.. whatever truck you get the mirror out of get the temp censor for it also.. just run the 2 wires from the mirror to the censor then hook up power and ground... just make sure you hook up the LT green wire to the ground so the mirror dont start acting funny...