hood insulation

[kennythewelder]

I love the Chevy emblem on your hood! Where did you get it?

I built it. It's aluminum, 11 ga I think. I cut the smaller bowtie first, then the bigger one. I wired the LEDs behind the smaller one, then drilled the holes in both. The I used some rivet nuts on the hood brace to secure it to the hood. It's wired to the hood light switch.

 

[StepSide88]

I built it. It's aluminum, 11 ga I think. I cut the smaller bowtie first, then the bigger one. I wired the LEDs behind the smaller one, then drilled the holes in both. The I used some rivet nuts on the hood brace to secure it to the hood. It's wired to the hood light switch.

That's awesome!

 

[OBS Oregon]

I built it. It's aluminum, 11 ga I think. I cut the smaller bowtie first, then the bigger one. I wired the LEDs behind the smaller one, then drilled the holes in both. The I used some rivet nuts on the hood brace to secure it to the hood. It's wired to the hood light switch.

Nice Job! Good looking truck too...

 

[mountie]

I got a replacement hood pad from LMC for my '88 GMC. It was very clean, still looked new and cheap!!

 

[PlayingWithTBI]

It was very clean, still looked new and cheap!!

So, you weren't happy with it?

 

[Caman96]

“It was very clean”

As opposed to the dirty ones they sell?

 

[azmikep]

LINGDA 21.53 SqFT 10mm Heat...

xc_hide_links_from_guests_guests_error_hide_media

$41 on Amazon exactly one roll did my underside of my hood. Tossed all the push in style retaining clips. The adhesive is good on this brand and it has not started to come off at all. I’m happy.

 

[Erik the Awful]

That looks nice. I had to look it up - here's the link for anyone else interested. www.amazon.com/LINGDA-Insulation-Dampening-Moistureproof-Waterproof/dp/B074STNQBQ/

I was working on Way Cool Jr yesterday and I noticed that I still have my hood insulation, but it's starting to come apart at the driver's front. I'm not sure if I'll replace it or just throw it away and be happy.

 

[RI Chevy guy]

I used bed liner on mine. It came out good.

You must be registered for see images attach

Nice truck Kenny, attention to detail is amazing

 

[kennythewelder]

Nice truck Kenny, attention to detail is amazing

Thank you. I do have a lot of work in it.