Riggormotor2222
Newbie
I decided I wanted to convert my 1998 chevy c1500 extended cab long bed truck to 6 lug. I got a rear axle I was told was out of a 97 chevy k1500. It bolted right up but the u joint size is different and the one that was for the 5 lug axle is a little smaller. So I need to know if the k1500 ujoint would fit in the 2 piece drive shaft that is in the truck or if I'm going to need to get a special uhoint or if the piece on the axle that the ujoint bolts to will swap with the one that is on the stock 98 2wd axle.